|
 EYELINK BELTS
 
Applications and features
Eyelink belts combine a flat, stable surface with the dimensional stability and robustness of metal and are well suited to heavy loads and unstable or fragile products requiring good support. A perfectly straight run is always assured by positive drive with toothed sprockets. A single opening means that eyelink belts are easy to clean. Twentebelt eyelink belts are durable and designed to be flexible.
Versions
There are many types of eyelink belt. The right belt for your application is made based on the type of eyelink, the belt pitch and the various options for finishing the side and installing flights.
Belt structure:
1. Eyelink to eyelink (type DO)
2. Modular structure with one or more welded underwires(type DP(L) and DL)
3. With flattened eyes for small opening (type DP)
Side finishing
1. With a welded side (LK)
2. Fitted with chain (KH) to be driven by gear wheels at the sides.
3. With side guide (ZG) for absolutely straight run.
4. Or with plastic blocks (KB) for virtually seamless connection to the machine frame.
Sizes:
1. Pitch (15.9 to 76.2 mm)
2. Wire diameters (1.6 to 3.2 mm)
3. Cross pitch (measured centre-to-centre of eyelinks 2.8 to 50 mm)
4. Number of underwires (0 to 8)
Eyelink belts are available in various materials, including AISI 304stainless steel and bright steel.
Drive
Belts depend on the right driving and turning wheels to operate well and without interruption, which is why Twentebelt develops and produces the required sprockets and rollers. Sprockets are equipped with special teeth configured for the belt structure, and tube, disc or strip rollers are available to drive the entire width of the belt.
Options
For specific applications, an eyelink belt can be fitted with options, such as edge plates (1) for thicker layers of unsorted products, or flights (2) for ascending and descending belts.
|
