|
 WIRE MESH BELTS
Applications/ features
Wire mesh belts have extra large openings and are very well
suited to coating processes such as chocolate covering, egg
glazing, breading and other applications in which the product
should have as little contact with the conveyor belt as possible.
This means it is especially suitable for light products. The
small radius on there verse means a good product transfer.
Wire mesh belts are flexible in terms of use and specifications.
Twentebelt also supplies 90° conveyor curves in various sizes
as well as separate belts.
Versions
Diverse combinations of pitch, wire diameter, mesh length
and side finishing create a wide range of fit-for-purpose
wire mesh belts.
Side finishing
1. With standard S side
(type GR-SK)
2. With a double bent
Z side (type GR-ZK)
|
  |
Sizes
1. Pitch (3.8 to 28 mm)
2. Wire diameter (0.9 to 2.8 mm)
3. Mesh length (25 to 150 mm)
Wire mesh belts are available in AISI 302 or 316 stainless steel and bright spring steel.
Drive
 
Wire mesh belts are driven by sprockets or discs of plastic
or stainless steel or by a friction drive with a rubbercoated
drum over the full width of the belt. These drives and turning
wheels are developed and produced by Twentebelt for wire mesh
belts and are intended to guarantee an optimal uninterrupted
run.
Options
 
Wire mesh belts can be equipped with integrated flights or
tips, or levels for fixed product spacing. The belt can be
made endless simply by pinching shut a connecter or by weaving
in a pre-bent wire.
|
