Twentebelt developed high performance veneer belts for the furniture and peeled veneer industry.
[rev_slider slide-veneer-en]
By meticulously testing and selecting the purest and most suitable steel grades for our wire and rods, Twentebelt assures reliable and high quality veneer belts that will guarantee our clients years of service. Twentebelt veneer belts are made with u-hook clinched edges for optimal side protection.
Although we have listed common veneer belt specifications in the sections below, custom specifications are always possible. In cooperation with our clients we are always able to offer an adequate solution for your specific veneer application.
A veneer belt is the most expensive wear and tear part of a dryer. In a worst-case scenario it can interrupt or even stop the production by failure and possibly spoil the jet boxes and damage the veneer.
Leading experts in the dryer and veneer industry depend on the reliability of Twentebelt veneer belts. We at Twentebelt have developed and engineered machines ensuring the most accurate and precise weaving tolerances for our clients. To guarantee the flattest and smoothest belt surface and to reduce marks on the veneer, our belts are manufactured with high quality flattened wire spirals.
Requesting a quotation for a veneer belt is easy. Simply click on the button below to input your specifications and our experienced sales team will get back to you as soon as possible.
Request a veneer belt quotation and our team will be in touch with you shortly!
Especially for use in the furniture veneer industry, Twentebelt developed high performance veneer belts that can be used in press dryers.
With our experience in production, workmanship and material selection we can offer our clients the best belting solution available.
Twentebelt offers reliable and cost-efficient veneer belts for the furniture veneer industry. Whether the process involves light or dark veneers, our experienced and highly qualified team can always achieve the best belting solution in cooperation with its clients.
Of course our service does not end with simply manufacturing the belts. Twentebelt can also offer the installation of the belts and, as we want our clients to use their veneer belts to their full satisfaction, they can continue to count on our service and expertise long after the initial installation of the belt.
Request a veneer belt quotation
Common belt specifications
Belt type | Spiral Pitch (mm) | Cross pitch (mm) | Spiral wire diameter (mm) | Crossrod wire diameter (mm) | Material for spirals | Material for crossrods |
---|---|---|---|---|---|---|
Top belt GS-BK 8.4-16.3-2x1-1.8 | 8.4 | 16.3 | 2x1 | 1.8 | AISI 316 | AISI 304 |
Bottom belt GS-BK 6.5-14.7-2x1-1.8 | 6.5 | 14.7 | 2x1 | 1.8 | AISI 316 | AISI 304 |
Especially for use in the peeled veneer industry, Twentebelt developed high performance veneer belts that can be used in press dryers or standard belt dryers.
Twentebelt guarantees high accuracy and low tolerances to allow customers to produce the finest peeled veneer in a cost-efficient way.
Our experienced engineering department is always able to offer tailor-made advice and diagnostics. This ensures unique custom belting solutions that put our clients one step ahead of the competition.
Offering precise and reliable veneer belts for the peeled veneer industry, Twentebelt is the trusted manufacturer by industry leaders all across the globe. Of course, the experienced staff at Twentebelt will remain at its clients’ disposal for any enquiries they may have.
Request a veneer belt quotation
Common belt specifications
Belt type | Spiral Pitch (mm) | Cross pitch (mm) | Spiral wire diameter (mm) | Crossrod wire diameter (mm) | Material for spirals | Material for crossrods |
---|---|---|---|---|---|---|
Top belt GS-SK 25-25-2.5x1.3-3 | 25 | 25 | 2.5x1.3 (semi-round) | 3 | AISI 304 or Galvanised | AISI 304 or Carbon Steel |
Bottom belt GS-SK 19-25-2.5x1.3-3 | 19 | 25 | 2.5x1.3 (semi-round) | 3 | AISI 304 or Galvanised | AISI 304 or Carbon Steel |
Top belt GS-SK 25-35-2.5x1.3-3 | 25 | 35 | 2.5x1.3 (semi-round) | 3 | AISI 304 or Galvanised | AISI 304 or Carbon Steel |
Bottom belt GS-SK 35-35-2.5x1.3-3 | 35 | 35 | 2.5x1.3 (semi-round) | 3 | AISI 304 or Galvanised | AISI 304 or Carbon Steel |
Requesting a quotation for a veneer belt is easy. Simply click on the button below to input your specifications and our experienced sales team will get back to you as soon as possible.
Request a veneer belt quotation